Tips For Safe Anchoring

21 May 2018
 Categories: , Blog


As a boat owner, you understand that the anchor plays one of the more important parts of the overall function of the vessel. Whether you find a nice area to stop in the middle of the water to fish or you're docking the boat, you need to be able to anchor properly. If you've been boating for years, or you're new to boating, here are some anchoring tips to keep in mind:

Set

The process of setting the anchor is the process of digging the anchor into the seabed. During this action, you have to take special steps not to damage the anchor, which can be easy to do. The first step in this process is to apply the power in reverse and in the direction of the wind. 

Every few moments you can release the tension on the reverse gear. If your boat continues to go in reverse, the anchor has not safely dug into the ground; however, if the boat starts to shift forward, in the direction of the anchor, you will know that the anchor has begun to set. 

Scope 

Another factor to consider is the scope. When anchoring, scope is a reference to the comparison between the depth of the water in the area you plan to anchor and the length of your anchor system, including the rope, chain, and catenary sections.

For safe anchoring, the horizontal length of the anchor system should be longer than the vertical depth from the base of the boat to the top of the seabed. For example, if anchoring in an area with a 75-foot depth, the anchor would need to be longer than 75 feet for extra safety. 

Reset

Since you set your vessel in the direction of the wind, you may find that you need to reset the anchor at times when the wind is severe. For example, if the wind is blowing hard, the anchor could detach from the seabed. It is vital that you be able to detect this movement so that you can re-anchor the boat and avoid a serious safety hazard. 

One way to monitor this is to activate your electronic compass feature. Adjust the compass to send a notification when the course of the boat changes. For example, if the boat was north-facing but changes to a southern angle, you will know that the anchor is losing tension.

Anchoring safely protects your boat and can keep the passengers on your boat safe. Make sure you are adapting to these and other safe anchoring procedures. For more information, contact companies like Fehrway Marine.


Share